ANT0667
GROUP: PATINA
DESCRIPTION: ANTIQUE EFFECT STAIN
CODE: ANT0667
Solvent based antique effect stain,
Black colured,
for application with a spray gun, on wood or woody material.
It is designed to be used with PUR and acrylic Topcoats and Sealers to produce unique finishing effects and grain enhancement.
ANT0667
Property
Specification
Units
Density (20°C)
0,82 - 0,86
gr/cc
Viscosity, Ford Cup 4 (20°C)
08 - 12
Sec.
Never apply the product to bare wood. This product has been specifically formulated to be applied over a properly sealed
surface.
It is recommended to stir well the product before use.
Apply the product by a spray gun, Allow the product to dry accurately before remove any excess. Once the product has dried, remove any excess with Scotch Brite, or fine steel wool.
To protect this patina, you can apply polyurethane varnish, "nitro" varnish or water-based varnish.
It is recommended to stir well the product before use.
Apply the product by a spray gun, Allow the product to dry accurately before remove any excess. Once the product has dried, remove any excess with Scotch Brite, or fine steel wool.
To protect this patina, you can apply polyurethane varnish, "nitro" varnish or water-based varnish.
Media type
Recommended amount
Useful time for steel wool refinishing
Overcoating
Keep it tightly sealed in its original container in a cool environment (between 4°C and 40°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.