Home
fiber_manual_record
VES0358
GROUP:
DESCRIPTION: Special Effects
CODE: VES0358
Dual component solvent based topcoat based on urethane resins,
for regular and electrostatic spray application on wood, or over pigmented solvent-based two-component acrylic/polyurethane finishes
characterized by the typical rubber effect, soft to the touch, but with good scratch resistence. Intended for interior applications.
characterized by the typical rubber effect, soft to the touch, but with good scratch resistence. Intended for interior applications.
VES0358
Property
Specification
Units
Density (20°C)
0,9-1,0
gr/cc
Viscosity, Ford Cup 4 (20°C)
28-38
Sec.
Solid Content
30-34
%
CVP0247
Property
Specification
Units
Density (20°C)
0,96 - 1,00
gr/cc
Viscosity, Ford Cup 4 (20°C)
08 - 10
Sec.
Solid Content
27 - 31
%
Harden VES0358 at 50% by weight with CVP0247,
subsequently thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
It is recommended to stir well the product after the thinning.
During application, the temperature of components should not be less than 18°C.
To get the best performance in terms of design and adhesion, the interaction with other supporting products is of the utmost importance, please contact our technical service.
During application, the temperature of components should not be less than 18°C.
To get the best performance in terms of design and adhesion, the interaction with other supporting products is of the utmost importance, please contact our technical service.
Pot-Life
Recommended quantity
Application with spray gun.
Application by Airmix System
Keep it tightly sealed in its original container in a cool environment (between + 4°C and + 30°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 5 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.