VOT 01_12032024
GROUP: TOPCOATS
DESCRIPTION: NATURAL OIL BASED VARNISH
CODE: VOT 01_12032024
Transparent single-component impregnating-finishing agent,
based on oils of vegetal origin emulsified in water,
for the protection of parquet and flooring in general exposed to exterior environment.
It can also be used for beams, ceilings and matchboards placed both indoor and exterior environment.
To be used alone and be applied in two coats directly onto raw wood.
To be used alone and be applied in two coats directly onto raw wood.
VOT 01_12032024
Property
Specification
Units
Density (20°C)
0,96 - 1,06
gr/cc
Viscosity, Ford Cup 4 (20°C)
9,0 - 16,0
Sec.
Solid Content
17 - 23
%
Preliminary sanding with P150 grain sanding paper and subsequently with P180 grain.
Carefully remove the wood dust and apply the first coat of product.
It is recommended to stir well the product before use.
Apply the product by brush (synthetic bristle brushes recommended), by roller, by deeping (using adequate dilution) or with a spray gun.
After application, let the product to be absorbed into the wood.
Remove excess material by a rag when still wet.
Apply the second coat within 2 hours of the first coat.
After 2 hours from the first coat it is necessary to sand the first coat with P240-280 grain spaced sandpaper before applying the second coat.
For spray-gun application use a pressure of 2 - 3 bar and a 1.3 - 1.8 mm nozzle.
After 2 hours from the first coat it is necessary to sand the first coat with P240-280 grain spaced sandpaper before applying the second coat.
For spray-gun application use a pressure of 2 - 3 bar and a 1.3 - 1.8 mm nozzle.
Keep it tightly sealed in its original container in a cool environment (between + 5°C and + 35°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.