APV 01_12032024
GROUP: SPECIALTY
DESCRIPTION: ADDITIVO
CODE: APV 01_12032024
APV 01_12032024 WOOD CLEANER SIGMAR-BIO is a water-based additive for restoring the original color of outdoor wooden products that have turned gray due to the action of outdoor weathering.
Easily to apply both by spray-gun and paint-brush,
it is suitable on exterior flooring, garden furniture, wooden claddings, fences, wooden beams.
WOOD CLEANER SIGMAR-BIO is 99,4% biodegradable.
WOOD CLEANER SIGMAR-BIO is 99,4% biodegradable.
APV 01_12032024
Property
Specification
Units
Solid Content
4,0 - 6,0
%
Viscosity, Ford Cup 4 (20°C)
24 - 30 Sec.
%
pH
1 - 3
pH
It is recommended to stir well the product before use.
Carry out a preliminary test on a small area of the surface to be treated.
Remove any traces of paint and dirt from the surface to be treated.
Before starting the treatment, wet , by spraying or with a brush, the surface with water to avoid excessive absorption of the product into the wood.
The product is ready-to-use, Apply APV 01_12032024 WOOD CLEANER SIGMAR-BIO by a paint brush or a pennello o a spruzzo fino a formare uno strato di circa un millimetro. Wait 15-20 minutes after applying, then brush carefully along the the wood grain to remove the layer that has formed using a scrubbing brush with sufficiently hard fibres, for example broomcorn or plastic (do not use metal brushes). Finally rinse thoroughly with water using the brush to remove residues.
For very weathered and grayed wood, repeat the treatment a second time..
The product is ready-to-use, Apply APV 01_12032024 WOOD CLEANER SIGMAR-BIO by a paint brush or a pennello o a spruzzo fino a formare uno strato di circa un millimetro. Wait 15-20 minutes after applying, then brush carefully along the the wood grain to remove the layer that has formed using a scrubbing brush with sufficiently hard fibres, for example broomcorn or plastic (do not use metal brushes). Finally rinse thoroughly with water using the brush to remove residues.
For very weathered and grayed wood, repeat the treatment a second time..
Keep it tightly sealed in its original container in a cool environment (between + 4°C and + 35°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.