FPP0577
GROUP: PRIMERS
DESCRIPTION: SEMI-COVERING POLYURETHANE PRIMER
CODE: FPP0577
Semi-opaque polyurethane primer for normal and electrostatic spray applications, on wood or wood-based materials, allows for good coverage, fast drying, excellent sanding and fast overcoating.
Suitable for flat or vertical applications, with good thixotropic properties. It is ideal when used in combination with the PPT02 pigment paste series to create coloured primers.
Developed mainly for use on MDF due to its good adhesion and elasticity.
Suitable for flat or vertical applications, with good thixotropic properties. It is ideal when used in combination with the PPT02 pigment paste series to create coloured primers.
Developed mainly for use on MDF due to its good adhesion and elasticity.
FPP0577
Property
Specification
Units
Density (20°C)
1,24 - 1,28
gr/cc
Viscosity, Ford Cup 4 (20°C)
Thixotropic (t>= 180’’)
Sec.
Solid Content
58,0 - 62,0
%
CVP0101
Property
Specification
Units
Density (20°C)
0,94 - 0,98
gr/cc
Viscosity, Ford Cup 4 (20°C)
9,0 - 12,0
Sec.
Solid Content
28,0 - 32,0
%
Harden the primer using the CVP0101 hardener at 50% by weight; subsequently thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
As an alternative to CVP0101, you can use CVP0143, always at 50% by weight.
In the case of critical substrates, where greater flexibility of the coating is required to avoid the formation of cracks over time, it is recommended to use the CVP0239 CATALIZZATORE ELASTICO PER FPP hardener, at 40% by weight.
As an alternative to CVP0101, you can use CVP0143, always at 50% by weight.
In the case of critical substrates, where greater flexibility of the coating is required to avoid the formation of cracks over time, it is recommended to use the CVP0239 CATALIZZATORE ELASTICO PER FPP hardener, at 40% by weight.
Dust free
Pot-Life
Sandable
Amount for single layer.
Overcoating
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.