HOI 02_02072021
GROUP: TOPCOATS
DESCRIPTION: 1K/2K WATER BASED TOPCOAT
CODE: HOI 02_02072021
Clear water based one/twocomponent anti-yellowing matt top coat, 5 Gloss,
for spray applications, on wood or woody materials,
formulated with resins from renewable sources.
A+ Very Low Emission.
A+ Very Low Emission.
HOI 02_02072021
Property
Specification
Units
Density (20°C)
0,98 - 1,08
gr/cc
Viscosity, Ford Cup 4 (20°C)
100 - 140
Sec.
Solid Content
22 - 28
%
CVP 01_06072021
Property
Specification
Units
Density (20°C)
1,06 - 1,16
gr/cc
Solid Content
65 - 69
%
It is recommended to stir well the product before use.
The product is ready for use, if necessary thin it with demineralized water. The thinning of the product is established at the time of application according to the application parameters present, recommended at 10% by weight. It is possible add the hardener CVP 01_06072021 at 5% by weight to improve its chemical and mechanical resistance. It is recommended to mix well after addition.
Apply by spraygun with nozzle of 1,6 - 2,0 mm and pressure of 1,0 - 3,0 bar.
It is recommended not to apply the product at a temperature below 18 ° C, the ideal humidity of the environment for the application is between 55 and 65% (a lower level of humidity could facilitate the formation of cracks, while a higher level of humidity delays the drying process).
The product is ready for use, if necessary thin it with demineralized water. The thinning of the product is established at the time of application according to the application parameters present, recommended at 10% by weight. It is possible add the hardener CVP 01_06072021 at 5% by weight to improve its chemical and mechanical resistance. It is recommended to mix well after addition.
Apply by spraygun with nozzle of 1,6 - 2,0 mm and pressure of 1,0 - 3,0 bar.
It is recommended not to apply the product at a temperature below 18 ° C, the ideal humidity of the environment for the application is between 55 and 65% (a lower level of humidity could facilitate the formation of cracks, while a higher level of humidity delays the drying process).
Pot-life ( with Hardener )
Touch-free
Recommended amount for single coat
Overcoating interval
Stacking
Keep it tightly sealed in its original container in a cool environment (between + 5°C and + 35°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.