113032-CARATTERISTICHE | Sigmar vernici

Solvent-borne, Matt, acrylic-polyurethane enamel, DTM, for metals and alloys, galvanized sheets and alluminium, characterise by high outdoor resistance, suited also for one coat direct applications on galvanized sheet. he presence of special corrosion inhibitors gives the product a high anti-corrosive resistance. It is used as matt top coat to paint metal supports in general.

KOAT702

Property

Specification

Units

Density (20°C)

1,10 - 1,25

gr/cc

Viscosity, Ford Cup 4 (20°C)

80,0 - 120,0

Sec.

Solid Content

66,0 - 72,0

%

CVP0205

Property

Specification

Units

Density (20°C)

0,98 - 1,02

gr/cc

Viscosity, Ford Cup 4 (20°C)

10 - 14

Sec.

Solid Content

36 - 40

%

If it is required a colored product, add the products of the PPT 02 series to the converter in the proportion and quantities suggested by the tintometric system. Stir well after adding. Harden the Converter mixture at 25% by weight with the CVP0205 hardener; subsequently, thin it with DPV0006. The thinning of the product is established at the time of application according to the application parameters present, recommended at 5-10% by weight. The substrate must be perfectly clean, dry, degreased and free from contaminants; The substrate must have a temperature between + 5°C and + 30°C, and in any case at least 3°C higher than the Dew Point. Apply with a spray gun having a nozzle from 1,3 to 1,5 millimeters and with a pressure of 2 to 3 bar.

Pot-Life

Suggested amount pro layer

Drying at room Temperature

Dust free

Touch-free

Overcoating - second coat

Stacking

Gloss Level

Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.

The product is intended for professional use only, refer to the Safety Data Sheet.