Home
fiber_manual_record
Special Effects
KOAT701
GROUP: SPECIALTY
DESCRIPTION: 2K ACRYLIC CONVERTER
CODE: KOAT701
Solvent-borne Glossy, acrylic enamel,
with High Gloss,
characterized by high glossy retention even if exposed to bad weather conditions.
It is used as top coat for refinishing and industrial vehicles..
Colourable in various shades with the addition of PPT 02 Series products .
The enamel is also suitable to be applied on Epoxy Primers.
KOAT701
Property
Specification
Units
Density (20°C)
1,40 - 1,50
gr/cc
Viscosity, Ford Cup 4 (20°C)
60 - 80
Sec.
Solid Content
70,0 - 78,0
%
CVP0208
Property
Specification
Units
Density (20°C)
1,04 - 1,10
gr/cc
Viscosity, Ford Cup 4 (20°C)
10 - 15
Sec.
Solid Content
64 - 74
%
If it is required a colored product, add the products of the PPT 02 series to the converter in the proportion and quantities suggested by the tintometric system.
Stir well after adding.
Harden the converter mixture at 33% by weight with the CVP0208 hardener; subsequently, thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 10% by weight.
The substrate must be perfectly clean, dry, degreased and free from contaminants;
The substrate must have a temperature between + 5°C and + 30°C, and in any case at least 3°C higher than the Dew Point.
Apply with a spray gun having a nozzle from 1,3 to 1,5 millimeters and with a pressure of 2 to 3 bar.
Pot-Life
Suggested amount pro layer
Drying at room Temperature
Hot forced air drying
Dust free
Touch-free
Overcoating time lapse
Stacking
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.