Semi-glossy Solvent-borne acryl-polyurethane enamel,
DTM, for metals and alloys.
The product is characterized by excellent outdoor resistance, good anti-corrosive power on iron supports andexcellent adhesion on galvanized sheets..
It is used as primer and top-coat with good anticorrosive property for metalwork in general.
Colourable in various shades with the addition of PPT 02 Series products .
It can also be used in the construction sector for painting internal and external floors as a colored anti-dust treatment, with a field of use in rooms with normal wheeled traffic and moderate traffic with forklifts.
If it is required a colored product, add the products of the PPT 02 series to the converter in the proportion and quantities suggested by the tintometric system.
Stir well after adding.
Harden the converter mixture at 30% by weight with the CVP0205 hardener, subsequently thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 10-15% by weight.
The substrate must be perfectly clean, dry, degreased and free from contaminants;
The substrate must have a temperature between + 5°C and + 30°C, and in any case at least 3°C higher than the Dew Point.
On galvanized sheet, a first coat of a suitable primer is recommended.
Apply with a spray gun having a nozzle from 1.8 to 2.0 millimetres and with a pressure of 2 to 3 bar.
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.