Water-based pore filler to be applied with a spray gun on wooden veneer, characterised by fast drying, used to increase the marking of the pore.
To protect this stain polyurethane varnish, "nitro" varnish, polyester varnish or water-based varnish can be applied.
The product is ready for use.
Apply with a spray gun having a nozzle from 1,3 to 1,5 millimeters and with a pressure of 2 to 3 bar.
Remove excess material by wipe (if wet) or sanding (after dry).
It is recommended to stir well the product before and during use.
Keep it tightly sealed in its original container in a cool environment (between 4°C and 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 20 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.