VES1000
GROUP: TOPCOATS
DESCRIPTION: PIGMENTED MATT PUR FINISH
CODE: VES1000
Solvent-Based pigmented matt polyurethane finish,
specific for glass,
yellow coloured,
for application with a normal or electrostatic spray gun, characterised by good filling, fast drying and surface hardness.
The finish is designed to be used exclusively in combination with the additive for glass, APV100.
The finish is designed to be used exclusively in combination with the additive for glass, APV100.
For the optimal choice of the hardener, and the percentage by weight to be used, depending on the desired result or the end use of the item, please contact our technical service.
To achieve adhesion on glass it is necessary to add the additive APV100 to the VES1000, up to a maximum of 2% by weight, before the use. It is recommended to stir it well for 5 minutes after its addition.
Surplus material must not be re-used, given that the APV0100 loses its adhesion characteristics after 12 hours.
To achieve adhesion on glass it is necessary to add the additive APV100 to the VES1000, up to a maximum of 2% by weight, before the use. It is recommended to stir it well for 5 minutes after its addition.
Surplus material must not be re-used, given that the APV0100 loses its adhesion characteristics after 12 hours.
Pot-Life
Dust free
Stacking
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.