GROUP: SPECIALTY
DESCRIPTION:
CODE:
2K acrylic solvent-based Top-Coat,
for normal and electrostatic spray applications, on wooden and plastic materials,
characterized by the typical rubber effect, soft to the touch, but with good scratch resistence.
Intended for interior applications.
VES0208
Property
Specification
Units
Density (20°C)
0,98 - 1,02
gr/cc
Viscosity, Ford Cup 4 (20°C)
25 - 35
Sec.
Solid Content
44 - 48
%
CVP0181
Property
Specification
Units
Density (20°C)
1,00 - 1,04
gr/cc
Viscosity, Ford Cup 4 (20°C)
10 - 14
Sec.
Solid Content
52 - 62
%
Harden the VES0208 Top-Coat at 20% by weight with the hardener CVP0181;
subsequently thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
It is recommended to stir well the product after the thinning.
To accelerate drying time, it is possible to use APV0103, with the following indicative results: 0.0% drying in 72 hours - 5% drying in 24 hours - 10% drying in 12 hours - 15% drying in 6 hours. The APV0103 accellerant reduce the Rubber Effect depending on the amount of the accellerant used. During application, the temperature of components should not be less than 18°C.
To get the best performance in terms of design and adhesion, the interaction with other supporting products is of the utmost importance, please contact our technical service.
To accelerate drying time, it is possible to use APV0103, with the following indicative results: 0.0% drying in 72 hours - 5% drying in 24 hours - 10% drying in 12 hours - 15% drying in 6 hours. The APV0103 accellerant reduce the Rubber Effect depending on the amount of the accellerant used. During application, the temperature of components should not be less than 18°C.
To get the best performance in terms of design and adhesion, the interaction with other supporting products is of the utmost importance, please contact our technical service.
Pot-Life
Application viscosity
Recommended quantity
Application with spray gun.
Application by Airless System
Application by Airmix System
Keep it tightly sealed in its original container in a cool environment (between + 4°C and + 30°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 10Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.