Home
fiber_manual_record
Automotive
VPT0107
GROUP: POLYESTER
DESCRIPTION: TRANSPARENT POLYESTER VARNISH
CODE: VPT0107
Gloss paint based on unsaturated polyesters, for spay applications, with redox catalysis, featuring good filling properties (to close wood pores) and high chemical resistance to abrupt temperature changes. Brushable and polishable.
VPT0107
Property
Specification
Units
Density (20°C)
1,06 -1,08
gr/cc
Viscosity, Din Cup 4 (20°C)
100 - 120
Sec.
APV0071
Property
Specification
Units
Density (20°C)
0,91 - 0,95
gr/cc
Viscosity, Ford Cup 4 (20°C)
9 - 11
Sec.
APV0072
Property
Specification
Units
Density (20°C)
0,85 - 0,89
gr/cc
Viscosity, Ford Cup 4 (20°C)
9 - 11
Sec.
CVP0168
Property
Specification
Units
Density (20°C)
0,90 - 0,94
gr/cc
Viscosity, Ford Cup 4 (20°C)
8 - 12
Sec.
Wood or woody materials must be sealed with IMT0022.
Harden the transparent polyurethane sealer IMT0022 at 100% by weight with hardener CVP0169, then thin with DPV0112.
The thinning of the product is established at the time of application depending on the current application parameters, approximately 50%.
Harden VPT0107, adding 1% by weight of APV0071 (accelerator), subsequently add 1% by weight of APV0072(degasser), and then add 10% by weight of the hardener CVP0168, shake well after each addition to the mixture. Bring to the application viscosity of 65'' with DPV0111. Apply by spraying at a pressure of 3.5 – 4.0 bar and using a 1.8 - 2.0 mm. nozzle.
To clean the equipment, use DPV0113.
Harden VPT0107, adding 1% by weight of APV0071 (accelerator), subsequently add 1% by weight of APV0072(degasser), and then add 10% by weight of the hardener CVP0168, shake well after each addition to the mixture. Bring to the application viscosity of 65'' with DPV0111. Apply by spraying at a pressure of 3.5 – 4.0 bar and using a 1.8 - 2.0 mm. nozzle.
To clean the equipment, use DPV0113.
Pot life with degasser and accelerator
Pot life with degasser, accelerator and hardener
Recommended quantity
Drying time
Surface treatments
Keep it tightly sealed in its original container in a cool environment (between 20°C and 30°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.
In the storage facility, keep APV0071 and CVP0168 separated, in order to avoid risks of explosion.
In the storage facility, keep APV0071 and CVP0168 separated, in order to avoid risks of explosion.