APV0101
GROUP: SPECIALTY
DESCRIPTION: ACCELERATOR
CODE: APV0101
Liquid accelerator additive for applications in the field of industrial polyurethane and acrylic products, to increase the catalysis speed and stabilise conductivity.
APV0101
Property
Specification
Units
Density (20°C)
0,89 - 0,93
gr/cc
Add The Accelerator to the polyurethane coating product in quantities from 1 to 5% on part A.
This limit must never be exceeded in order to avoid problems of adhesion or cracking of the paint film.
The added amount depends on the normal drying speed of the product and is however deductible through practical tests.
The product decreases the pot-life of polyurethane and acrylic systems.
It is recommended to stir it in well for 5 minutes during its addition.
This limit must never be exceeded in order to avoid problems of adhesion or cracking of the paint film.
The added amount depends on the normal drying speed of the product and is however deductible through practical tests.
The product decreases the pot-life of polyurethane and acrylic systems.
It is recommended to stir it in well for 5 minutes during its addition.
Keep it tightly sealed in its original container in a cool environment (between 4°C and 40°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.