GROUP: PRIMERS
DESCRIPTION:
CODE:
White-coloured polyurethane primer, for application with a normal or electrostatic spray gun, on wood or woody material, characterised by good coverage, fast drying, excellent sanding and fast overcoating.
Intended for use on vertical surfaces, with good thixotropic properties.
Intended for use on vertical surfaces, with good thixotropic properties.
FPP0168
Property
Specification
Units
Density (20°C)
1,43 - 1,47
gr/cc
Viscosity, Ford Cup 4 (20°C)
Thixotropic (t>= 180’’)
Sec.
Solid Content
70 - 80
%
CVP0143
Property
Specification
Units
Density (20°C)
0,92 - 0,96
gr/cc
Viscosity, Ford Cup 4 (20°C)
09 -12
Sec.
Solid Content
21 - 25
%
To harden the primer, use the hardener CVP0143 at 50% by weight; subsequently, thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
As an alternative to CVP0143, you can use CVP0101, always at 50% by weight, which increases both coverage and the drying speed of the product.
In the case of critical substrates, where greater flexibility of the coating is required to avoid the formation of cracks over time, it is recommended to use the CVP0239 CATALIZZATORE ELASTICO PER FPP hardener, at 40% by weight.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
As an alternative to CVP0143, you can use CVP0101, always at 50% by weight, which increases both coverage and the drying speed of the product.
In the case of critical substrates, where greater flexibility of the coating is required to avoid the formation of cracks over time, it is recommended to use the CVP0239 CATALIZZATORE ELASTICO PER FPP hardener, at 40% by weight.
Dust free
Pot-Life
Sandable
Amount for single layer.
Overcoating
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.