Clear polyester varnish,
for application with non-electrostatic spray gun,
on wood or woody materials,
characterised by
good filling properties, gloss level, thixotropy and good surface hardness.
Intended for use either on level or vertical surfaces, with good thixotropic properties.
Add to the VPT the APV0052 accelerator at 2% by weight and mix well; subsequently, harden it with the hardenerCVP0028, at 2% by weight and finally thin it with DPV0058.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 10% by weight.
Apply by spraying at a pressure of 3.5 – 4.0 bar and using a 1.8 - 2.0 mm. nozzle.
Keep it tightly sealed in its original container in a cool environment (between 20°C and 30°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.
In the storage facility, keep APV0052 and CVP0028 separated, in order to avoid risks of explosion.