SML01_31082021
GROUP: FILLER
DESCRIPTION: FILLER
CODE: SML01_31082021
Acrylic single-component water-based solvent-free joint filler for wooden floors.
Mixed with wood dust, it is used to smooth and repair imperfections and cracks in wooden floors.
has excellent filling power allowing a quick sanding of the floor without shrinkings.
Intended for interiors applications
SML01_31082021
Property
Specification
Units
Solid Content
15,0 - 07,0
%
Density (20°C)
0,80 - 0,85
%
It is recommended to stir well the product before use.
Polish the wooden floor with 24 or 36 grit sandpaper and then with 80 grit. Clean carefully from wood dust. Mix the filler with the dust produced by sanding the wooden floor, in a ratio of 15-20% powder and 85-80% Filler.
Apply the mix Filler/Wood Dust, with a smooth trowel. The use of plastic or stainless steel spatulas is recommended as iron ones can release the colour of oxides and rust.
After finishing the smoothing, if some cracks are still open, repeat the application always mixing the Filler with the same wood dust. Then sand with 100 grit abrasive paper and proceed with the next sanding steps.
Polish the wooden floor with 24 or 36 grit sandpaper and then with 80 grit. Clean carefully from wood dust. Mix the filler with the dust produced by sanding the wooden floor, in a ratio of 15-20% powder and 85-80% Filler.
Apply the mix Filler/Wood Dust, with a smooth trowel. The use of plastic or stainless steel spatulas is recommended as iron ones can release the colour of oxides and rust.
After finishing the smoothing, if some cracks are still open, repeat the application always mixing the Filler with the same wood dust. Then sand with 100 grit abrasive paper and proceed with the next sanding steps.
Sandable
Overcoating
Keep it tightly sealed in its original container in a cool environment (between +10°C and +25°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.