Home fiber_manual_record Furniture
UPT0530
GROUP: TOPCOATS
DESCRIPTION: VARNISH FOR EXTERIOR
CODE: UPT0530
2K Solvent-based clear multilayer paint, suitable for application with spray, brush and roller, on wood or woody materials, characterised by a good verticality and filling, good elasticity and resistance to external agents. The product contains components that reduce the formation of fungi and mold in the wood and filters that protect the wood and paint from degradation due to sunlight.
UPT0530
Property
Specification
Units
Density (20°C)
0,97 - 1,02
gr/cc
Viscosity, Ford Cup 4 (20°C)
65 - 75
Sec.
Solid Content
42 - 48
%
CVP0224
Property
Specification
Units
Density (20°C)
0,95 - 0,99
gr/cc
Viscosity, Ford Cup 4 (20°C)
10 - 13
Sec.
Solid Content
29 - 33
%
Harden the UPT0530 at 50% by weight with the CVP0224 hardener, subsequently thin it with DPV0006. The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight. Sand the substrate wit P150 - P180 sanding paper and carefully remove the sanding powder from the surface before to apply the first varnish coat . For the subsequent application, on the previous layers, sand with P320 sanding paper and carefully remove the sanding powder from the surface. Then apply the next layer. Pay attention to respect the appropriate drying times of each coat to avoid surface defects.
To improve durability over time, before applying UPT0530, on open-pored woods, it is recommended to apply a first coat of IMT0022 sealer, hardened with CVP0169 at 100%.
It is possible to color the UPT0530 by adding the pastes of PPT02XX series in the opportune ratio to obtain the desired shade of color, up to a maximum of 25% by weight. It is recommended to stir it well for 5 minutes after its addition.
Pot-Life
Suggested amount
Dust free
Touch-free
Sanding
Sanding
Stacking
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions. Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.