Two-component, solvent-based acrylic finish,
for application with a normal or electrostatic spray gun, on wood or woody material and plastics,
Intended for applications on interior components.
This product gives to the surface a matt effect, "soft" to the touch, with a good resistance to scratching.
Harden the product with CVP0181 at 20% by weight; subsequently, thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
It is recommended to stir well the product before use.
Clean the substrate accurately prior to the application; if necessary, use a suitable adhesion promoter ( recommended for applications on plastic parts).
During application, the temperature of components should not be less than 18°C.
To get the best performance in terms of design and adhesion, is of the utmost importance considering the interaction with other used products and the substrate, please contact our technical service.
Keep it tightly sealed in its original container in a cool environment (between + 4°C and + 30°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 10Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.