Clear matt polyurethane topcoat, solvent-based,
for application with a normal or electrostatic spray gun, on wood or woody material,
for open-pore and closed-pore topcoats,
characterised by good verticality and filling, fast drying and surface hardness.
Intended for general use, available in various degrees of opacity, measured in Gloss units.
Harden the topcoat of OPTA series using the hardener CVP0097 at 50% by weight,
subsequently thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
When a better product spreading is required, it is recommended to add a small amount of retardant thinner DPV0026 to the mix.
As an alternative catalyst, it is possible to use CVP0126, which increases the drying speed.
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.