VES02-03 GOLD SERIES
GROUP: SPECIALTY
DESCRIPTION: SINGLE-COMPONENT METALLIC GOLD PAINT
CODE: VES02-03 GOLD SERIES
Single-component solvent-based paint, for application with normal or electrostatic spray gun, able to confer to the surface a looks similar to matt gold. The product has direct adhesion on wood and woody matherials, and upon appying the suitable primers, on metals, plastics and MDFs .
Highly resistant to scratches, wear and thermal shock, according to the products used as topcoat.
Non-yellowing product suitable for both indoor and outdoor items, depending on the amount of cycles used.
Available in the following shades: VES0299 (gold) - VES0300 (green/gold) - VES0301 (pale gold) - VES0302 (red/gold) - VES0347 (bright pale rich gold) - VES0348 (bright pale gold)
Non-yellowing product suitable for both indoor and outdoor items, depending on the amount of cycles used.
Available in the following shades: VES0299 (gold) - VES0300 (green/gold) - VES0301 (pale gold) - VES0302 (red/gold) - VES0347 (bright pale rich gold) - VES0348 (bright pale gold)
VES02 - 03 GOLD Series
Property
Specification
Units
Density (20°C)
0,94 - 0,98
gr/cc
Viscosity, Ford Cup 4 (20°C)
32 - 38
Sec.
Solid Content
20 - 24
%
Thin the Product with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 50% by weight.
When a better product spreading is required, it is recommended to add a small amount of retardant thinner DPV0026 to the mix.
Apply two coats of product with an interval of about 3 - 5 minutes.
When a better product spreading is required, it is recommended to add a small amount of retardant thinner DPV0026 to the mix.
Apply two coats of product with an interval of about 3 - 5 minutes.
Suggested amount
Dust free
Overcoating interval
Stacking
Keep it tightly sealed in its original container in a cool environment (between + 4°C and + 30°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
Standard pack size is 1 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.