Home fiber_manual_record Furniture
SML0364
GROUP: FILLER
DESCRIPTION: FILLER
CODE: SML0364
1k plastic putty, colourless , usable for filling of wood pores, spotting of scratches, small holes and other damages of wood and metal.
Due to the thixotropic consistency, similar to a nitro putty, as well as the elasticity and filling power of a synthetic resin putty, the plastic filler can be used universally.
Wet layer thickness max. 1000 my.
SML0364
Property
Specification
Units
Solid Content
74 - 78
%
Substrate must be stable, dry, clean and free from any substances (oil, grease, wax). Clean new iron parts before filling and paint with properly primer. Primers must be properly cured before filling, otherwise there is a risk of loosening.
The filler can be applied directly to raw wood. For firmly adhering on old coatings, a thorough sanding is sufficient before filling. If necessary, apply 2 - 3 layers in the deepest points.
Sandable
Overcoating - with water-thinnable, oil and synthetic resin varnishes.
Overcoating - with nitro and PUR spray coatings
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard pack size is 1,5 Kg. For other specific requirements a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.