KLPT125
GROUP: TOPCOATS
DESCRIPTION: GLOSSY POLYURETANE CONVERTER
CODE: KLPT125
Glossy clear polyurethane Converter,
for application with normal or electrostatic spray gun, on wood or woody material characterised by good verticality, excellent filling, fast drying time and surface hardness.
Colourable in various shades with the addition of PPT series products up to 25% by weight.
Colourable in various shades with the addition of PPT series products up to 25% by weight.
KLPT125
Property
Specification
Units
Density (20°C)
0,98 - 1,02
gr/cc
Viscosity, Ford Cup 4 (20°C)
35 - 45
Sec.
Solid Content
48 - 52
%
CVP0172
Property
Specification
Units
Density (20°C)
0,99 - 1,03
gr/cc
Viscosity, Ford Cup 4 (20°C)
09 - 12
Sec.
Solid Content
37 - 41
%
Add the PPT series products to the KLPT125 in the opportune ratio to obtain the deired shade of color, up to a maximum of 25% by weight.
Stir well after adding.
Harden the converter mixture at 100% by weight with the CVP0172 hardener, subsequently thin it with DPV0006.
The thinning of the product is established at the time of application according to the application parameters present, recommended at 20% by weight.
When a better product spreading is required, it is recommended to add a small amount of retardant thinner DPV0026 to the mix.
As an alternative, it is possible to use the CVP0096 hardener at 50% by weight for an anti-yellowing effect or at 100% by weight when are required brushing and polishing processes
When a better product spreading is required, it is recommended to add a small amount of retardant thinner DPV0026 to the mix.
As an alternative, it is possible to use the CVP0096 hardener at 50% by weight for an anti-yellowing effect or at 100% by weight when are required brushing and polishing processes
Dust free
Pot-Life
Stacking
Gloss Level
Keep it tightly sealed in its original container in a cool environment (between - 5°C and + 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.