HOI4017
GROUP: PRIMERS
DESCRIPTION: WATER BASED SINGLE-COMPONENT SEALER/TOPCOAT
CODE: HOI4017
Water-based multilayer acrylic paint, with good transparency, gloss, resistance and anti-blocking properties, to be applied both as a sealer and as a topcoat.
Intended for applications, both on horizontal and on vertical surfaces, on solid or veneered wood furnitures for interiors.
Water thinnable.
HOI4017
Property
Specification
Units
Density (20°C)
1,01 - 1,05
gr/cc
Viscosity, Ford Cup 4 (20°C)
135 - 165
Sec.
Solid Content
26 - 30
%
It is recommended to stir well the product before use.
The product is ready for use, if necessary thin it with water. The thinning of the product is established at the time of application according to the present application parameters. Stir well after thinning.
Before spraying, prepare the substrate with 180p or 280p sanding paper and carefully remove the sanding dust from the surface.
For optimal results, product application and drying should happend at higher temperature than 15°C and humidity lower than 80%.
For the subsequent application, on the previous layers, sand with 320p sanding paper and carefully remove the sanding powder from the surface. Then apply the next layer.
The product is ready for use, if necessary thin it with water. The thinning of the product is established at the time of application according to the present application parameters. Stir well after thinning.
Before spraying, prepare the substrate with 180p or 280p sanding paper and carefully remove the sanding dust from the surface.
For optimal results, product application and drying should happend at higher temperature than 15°C and humidity lower than 80%.
For the subsequent application, on the previous layers, sand with 320p sanding paper and carefully remove the sanding powder from the surface. Then apply the next layer.
Dust free
Touch-free
Sandable
Amount for single layer.
Keep it tightly sealed in its original container in a cool environment (between 4°C and 40°C) that is not subject to abrupt temperature excursions.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
Standard packaging size of 25 Kg; for other requests a feasibility evaluation will be made.
The product is intended for professional use only, refer to the Safety Data Sheet.